Orion Car Audio XTRPRO102 User Manual
Page 17
16
© 2008 directed electronics—all rights reserved
Enclosure Details
Parameters listed are for conventional applications only, for further help please
1.
call Audio Tech Support.
At least 0.75" MDF (Medium Density Fiberboard) is recommend for any XTRPRO
2.
enclosure.
Recommended enclosures are NET box volumes, speaker and port displacement
3.
are calculated into the volume of the enclosure, you will not need to add these
volumes to calculate GROSS volume for the enclosure.
Notes
* Due to the high power capabilities and long excursion of the XTRPRO woofers, the
Thiele/Small Parameters were calculated and measured using a Klippel analyzer
system.
** Energy Bandwidth Product (EBP) is determined by the following formula Fs/
Qes=EBP. EBP values of 50 and lower suggest a sealed enclosure is best, 50 to90
means the subwoofers versatile and 90 and above mean vented Enclosure is
recommended.
*** Subsonic filter should always be used and adjusted specifically for vented box
designs.
D
A
E
C
B
Figure 13
Figura 13
Abbildung 13
XTRPRO102
XTRPRO104
XTRPRO122
XTRPRO124
XTRPRO152
XTRPRO154
Dimensions inches/mm, Dimensions po/mm, Dimensiones plg./mm, Abmessungen Zoll/mm,
Dimensioni pollici/millimetri, Dimensões polegadas/mm
A
5.87/149
5.87/149
6.46/164
6.46/164
7.49/190
7.49/190
B
2.84/72
2.84/72
2.84/72
2.84/72
2.84/72
2.84/72
C
6.15/156
6.15/156
6.15/156
6.15/156
6.15/156
6.15/156
D
8.87/225
8.87/225
10.91/277
10.91/277
13.87/352
13.87/352
E
10.24/260
10.24/260
12.29/312
12.29/312
15.29/388
15.29/388