OPPO Digital OPDV971H - Manual (Page 32)

S E T U P M E N U O P T I O N S
28
6. DVD-Audio Mode: To select which portion of a hybrid DVD-Audio disc to playback. The
options are:
• DVD-Audio – Play the DVD-Audio portion of the disc with surround audio
• DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio
7. DivX VOD: DivX Video on Demand – To display the device registration code for DivX Video on
Demand service. To learn more, visit www.divx.com/vod
8. Subtitle Font: To select the subtitle font size for DivX video. There are three font sizes
available. This setting applies only to DivX video files with a text subtitle. DivX video files with a
graphic subtitle do not use the DVD player’s built-in font, so the font size cannot be adjusted.
Speaker Setup Page
1. Downmix Mode: To set the audio down-mix mode to convert multi-channel audio into two-
channel output. This setting only affects the “Mixed L/R” analog audio outputs. The options
are:
• LT/RT - Left and Right channels only. This mode is intended for use with two-channel
Dolby Pro Logic receivers. If the content is encoded with Dolby Pro Logic then the encoded
audio will be passed to the receiver for Dolby Pro Logic processing. For stereo content the
output will be stereo. For multi-channel content only the left front and right front channels
will be re-produced.
• Stereo - This mode down-mixes decoded multi-channel (5.1ch) audio to 2-channel stereo
output. For stereo content the output will be stereo. For multi-channel content the surround
and center channels will be mixed with the left and right front channels. Recommended for
use with TV sets or stereo receiver/amplifiers.
• V. SURR - Virtual Surround. This mode creates a virtual surround effect from stereo or
multi-channel audio contents.
• 5.1 CH – This mode enables 5.1ch decoded analog audio output. The number of actual
output channels depends on the disc.
2. Front Speaker: To set the sound filtering control for the front speakers. The options are:
• Large – Choose if the front speakers are large. Bass frequencies are passed to the front
speakers.
• Small – Choose if the front speakers are small. Bass frequencies are not passed to the
front speakers to reduce possible distortion.
3. Center Speaker: To set the sound filtering control for the center speaker. The options are:
• Large – Choose if the center speaker is large. Bass frequencies are passed to the center
speaker.