Onkyo SKS-HT530 - Manual (Page 4)

En-
4
Package Contents
Make sure your box contains all of the items below. If
anything is missing, contact the nearest Onkyo dealer.
The alphabet displayed at the end of the product name
found in catalogs and on package represents the color of
the system. Though the color varies, the specifications
and operations are the same.
Getting to know Your
Speaker Package
A STANDBY/ON indicator
Red:
Subwoofer in standby mode
Green: Subwoofer on
With the Auto Standby function, the SKW-530
automatically turns on when an input signal is
detected in Standby mode. When there’s no input
signal for a while, the SKW-530 automatically
enters Standby mode.
B OUTPUT LEVEL control
This control is used to adjust the volume of the sub-
woofer.
C LINE INPUT
This RCA input should be connected to the sub-
woofer pre out on your AV receiver, amp, or other
receiver with supplied RCA cable.
D POWER switch
Press this switch to the ON position to turn on the
power. Press it to the OFF position to turn off the
power.
Note:
The Auto Standby function turns the subwoofer on when
the input signal exceeds a certain level. If the Auto
Standby function does not work reliably, try slightly
increasing or decreasing the subwoofer output level on
your receiver or amp.
• Front speakers
(SKF-530F)
• Speaker cable for front
speakers 4.5 m (15 ft.)
(Red) (White)
• Center speaker
(SKC-530C)
• Speaker cable for center
speaker 3 m (10 ft.)
(Green)
• Surround speakers (SKM-530S/SKB-530)
• Speaker cables for surround speakers 9 m (30 ft.)
(Blue) (Gray)
• Subwoofer (SKW-530) • RCA cable for sub-
woofer connection
(Brown) (Tan)
Subwoofer (SKW-530)
2 3 4
MIN MAX
1
■ Rear
To AC outlet
■ Front