Oricom TP29 - Manual (Page 13)

-Operation-
Note: If you enter the wrong number, you can use the
CLEAR
button to edit
the number.
3. Now select a speed dial storage location by pressing
MEMORY
button and a
number between 0 and 9 on the number pad.
Tip!
To erase a stored number simply store a new number in the storage location that
you want to erase. The storage locations can be written on the index card for
quick reference. Remove the protective transparent cover using a ballpoint pen or
a small pin.
5.3 Saving numbers in the phonebook
1. Press the
BOOK
button. The display shows “SEARCH ADD” with “SEARCH”
flashing.
2. Press the c buttons until the “ADD” is flashing.
3. Press the
BOOK
button again to confirm.
4. Enter the name characters (maximum 15 chars) using the number buttons.
5. Press the
BOOK
button to advance to telephone number.
6. Enter the telephone number (maximum 15 digits) using the number buttons.
7. Press the
BOOK
button to store the number in phonebook.
8. If you want to enter the next telephone number, press the
RECALL
button
back to step 2.
Tip!
If you enter the wrong number, you can use the
CLEAR
, d and c buttons to
edit the number.
5.4 Making a call using the one touch dial buttons
1. Lift the receiver or press the handsfree button .
2. Now press the required one touch dial button
A1
,
A2
to
A10
. The stored
number will now be dialled automatically.
3. To end the call, replace the receiver or press the handsfree button .