Oreck Multi-Purpose Automotive Vacuum and Light 40108-01 - Manual (Page 3)

Parts List
1. ON/OFF Switch
2. Dust Container Release
3. Dust Container
4. Nozzle
5. Crevice Tool
6. Brush Tool
7. Accessory Power Outlet Adapter
Note: Flexible Suction Hose not pictured.
Operating Instructions
Remove cigarette lighter from accessory power
outlet and insert adapter into the outlet.
Note: Ensure adapter is fully inserted and
power is supplied to the accessory power
outlet. (Consult your vehicle owner’s manual
to determine the proper ignition setting.)
Push the power switch forward to operate vacuum.
Using Attachments
To use the attachments (i.e. the crevice tool
and brush tool), simply push the required tool
into the nozzle as shown.
Note: When using the flexible suction hose, insert
the small end of the hose directly into the nozzle.
Insert attachment into larger end of suction hose.
Cleaning
Note: Before emptying the dust container,
turn the unit off and unplug it from the
accessory power outlet.
To remove the dust container, press down on
the dust container release button and gently tilt
the dust container forward.
Remove the filter from the dust container and
clean as shown.
Empty, wash and dry the inside of the dust
container. Make sure the dust container is dry
and replace the filter before reusing.
Replace dust container by attaching bottom of
container with vacuum and raising up to lock in
place.
1
2
6
5
4
3
7