Olympus DM-2 - Manual (Page 33)

33
1
EN
In
se
rt
in
g a
n
d e
je
ct
in
g
a m
ic
ro
SD c
a
rd
Ejecting a microSD card
1
While the recorder is during stop
mode, open the card cover.
2
Push the microSD card inward to
unlock it, and let it eject partially.
• The microSD card is visibly out of the
slot and can be removed safely.
• When [Memory Select] is set to
[microSD Card], [Built-in Memory
Selected] will appear.
3
Close the card cover securely.
Inserting and ejecting a microSD card
Notes
• Releasing your finger quickly after pushing
the microSD card inward may cause it to
eject forcefully out of the slot.
• Depending on the microSD card maker
or type, some microSD cards may not be
recognized properly due to incompatibility
issues with the recorder.
• Be sure to read the instruction manual
supplied with the microSD card before using
it.
• In the case when the microSD card cannot
be recognized, remove the microSD card
then put it in again to see if this recorder
recognizes the microSD card.
• The processing performance reduces in a
microSD card when you repeat writing and
delete. In this case, format the microSD card
(
☞ P.99).
• There is no guarantee that all microSD cards
work with the recorder.
• See the Olympus support homepage for
a list of microSD cards verified for this
recorder in accordance with the Olympus
standards.
http://olympus-imaging.com/
Although verified SD card makers are
shown on the Olympus homepage,
Olympus doesn’t guarantee compatibility
in all cases.
Also, according to changes in card
specifications, support may become no
longer available.