24 using dab, Using dab, Ensemble search mode – Onkyo CR-505DA User Manual
Page 24: Press the [menu] button, Turn the [ ] control to select an ensemble
24
Using DAB
1
Press the [DAB] button on the remote con-
troller, or press the [INPUT] button on the
CR-505DAB repeatedly to select DAB
input.
Using the DAB for the first time:
When you first switch on the unit and select DAB, the Auto
Tuning function scans the Band III frequencies.
After the scanning, the first scanned component will be
selected and you will hear it through your speakers.
To listen to other stations, use one of the search modes
shown below.
•
Ensemble search mode:
Selects the frequency (Ensem-
ble) (Page 24).
•
Component search mode:
Searches the components
(Page 25).
•
Sorted List search mode:
Searches in the sorted order in
the selected sort mode (Page 25).
•
Preset search mode:
Searches the preset components
(Page 26).
You can use the Auto Tuning function manually:
You may want to re-tune at a later date if you move the CR-
505DAB or if you want to receive a newly introduced
ensemble.
1. Press the [MENU] button.
2. Turn the [
] control to select “Auto Tuning” and
push the [
] control.
3. The Auto Tuning starts and scans the Band III frequen-
cies. The number of scanned components are shown dur-
ing scanning.
Notes:
• You can also control this function using the [MODE],
PRESET [
]/[
] and [ENTER] buttons on the
remote controller.
• During BAND III scanning, the DAB only scans the
audio services in the 174.928-239.200 MHz band range.
About secondary service:
If a secondary service exists, the “
>>
” symbol will light up
in the “Ensemble No. & Freq.” Press the [ENTER] button to
select the secondary service.
While the secondary service is selected, the “<<” symbol
will light up on the display. Press the [ENTER] button to go
back to the primary service.
You can select any frequency (ensemble) scanned by using
the Auto Tuning function.
1
Press the [MENU] button.
2
Turn the [
] control to select “Search
Mode” and push the [
] control.
3
Turn the [
] control to select “Ensem-
ble” and push the [
] control.
4
Turn the [
] control to select an
ensemble.
Using DAB
STANDBY / ON
INPUT
MENU
BASS
TREBLE
PUSH TO ENTER
PRESET
DIRECT
PHONES
VOLUME
MIN
MAX
/
MENU
INPUT
AM
FM
DAB
DIRECT
TAPE
CD
MD
MUTING
--/---
7
8
9
10/0
4
5
6
2
3
1
CLOCK
CALL
TIMER
CLEAR
REPEAT
DISPLAY
SLEEP
MODE
ENTER
INPUT
STANDBY/ ON
ENTER
MODE
PRESET /
DAB
Ensemble Search Mode
/
/
/
/
/
/
/