Sylvania 6727DB - Manual (Page 41)

– 41 – EN
01A11
ZOOM PLAYBACK
(enlargement onscreen)
Images can be enlarged four times on the screen to
your taste.
Press the ZOOM button during playback.
¡ An image will be enlarged at the center of the
screen.
¡ Press the ZOOM button again, and the image will be
back to the previous size.
DVD
Zoom [on]
When the cursor ( K / L / s / B ) button is pressed
during zoom play, the part to be zoomed moves.
¡ The zooming frame can be moved from the center
.... 4 steps to the right. 4 steps to the left. 4 steps to
the top. 4 steps to the bottom.
PROGRAM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program screen will appear.
CD
Audio CD
Program
Total
[Track]
– –
[Time]
0:00:00
Random : MODE
Track 00 / 15
Exit : RETURN
Start : PLAY Delete : CLEAR
2 Press the numeric buttons to enter the
desired track numbers.
¡ The total playback time for the
selected tracks will appear on the
TOTAL line.
3 Press the PLAY button.
¡ Playback will start in the programmed order.
¡ While the program is being played back, the STOP
button works as follows.
¡ Press the STOP button once and then the PLAY
button again, playback will restart from the point
where the STOP button was pressed. (Program
continued)
¡ Press the STOP button twice and then the PLAY
button again, playback will restart from the first tune
in the program in the usual way. (Program
continued)
¡ Press the STOP button three times and then the
PLAY button again, playback will restart from the
track in the usual way. (Program cleared)
Notes
¡ Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡ Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡ Numbers which exceed the number of tracks on the
disc in the tray are not accepted.
¡ Playback from a desired track and random playback
are not available during program playback.
¡ Program settings are cleared when the power is
turned off or the disc loading tray is opened.
¡ If the track no. is once set in the program, the setting
cannot be changed.
02 05 07 14 01 09 13 10 03 11
08 04
Audio CD
Program
Total
[Track]
12
[Time]
0:47:29
Random : MODE
Track 04 / 15
Exit : RETURN
Start : PLAY Delete : CLEAR
RANDOM (Audio CD)
1 Press the MODE button in stop mode.
¡ The program setting menu screen will appear.
2 Press the MODE button again.
3 Press the PLAY button. Random playback
will then start.
Note
¡ Program playback is not available during random
playback.
CD
Audio CD
Random
Exit : MODE Start : PLAY
"TD370_35-55 01.5.23 11:45 AM Page 41