Sylvania 6842PE M - Manual (Page 20)

20
CONNECTING PLASMA DISPLAY TO AUDIO SYSTEM
NOTE:
Cables shown here are not included with the plasma display.
AUDIO Signal Connection
AUDIO
2 ×RCA
audio cables
R
L
TV
AUDIO IN
VIDEO AUX
(Example: Amplifier/Receiver)
Audio output
to L/R jacks
R
L
AUDIO OUT
EXTERNAL INPUT TERMINALS
Connect the AUDIO OUT from the plasma display to the AUDIO IN on the amplifier/receiver.
Connect the power cable to the plasma display after connecting the input terminals.
1
2
A C I N
1
Connect the power cable to the plasma display
first.
2
Connect the power cable to an AC outlet.
# CAUTION
• Do not connect the power cable to a power
supply outside the indicated voltage of the
plasma display (AC 120V). Connecting the
power cable to a power supply outside of this
range may result in fire or electrical shocks.
• Always use the power cable included with the
plasma display. Do not use any other cable.
For safety, make sure to always connect the
power cable to a three pronged AC outlet.
C
ONNECTING THE POWER CABLE