OPTI-UPS SNMP Box - Manual

60.
Line Interactive
UPS Series
On Line UPS
Series
A
VR Series
Networking
Series
Inverter Series
Surge Series
Green Power
Series
Standby UPS
Series
OPTI-UPS .NETpower SNMP & LAN CARD and BOX
The OPTI-UPS .NETpower SNMP CARD and SNMP box provide you with most powerful UPS management and
monitoring functions. No more need to have a PC directly connected to UPS for these purposes. A compact card
inserted into SNMP card slot of your PS-B or DS-B UPS series or a miniature SNMP box connected to ES-C series
make your UPS a full featured power protection system ready for remote control via Internet/Intranet or even public
telephone network.
.NETpower SNMP card/box has all capability of OPTI-SAFE Xtreme software including SNMP support plus several
valuable UPS management functions.
SNMP (Simple Network Management Protocol) is an industrial standard used for network management, which
allows you to incorporate your OPTI power protection devices into your company’s unified monitoring system based
on such products as HP OpenView, IBM NetView or others.Besides being a full featured OPTI-SAFE Xtreme clone
.NETpower SNMP card/box has these great capabilities.
Network Management
.NETpower SNMP card/box supports telnet management and web management via HTTP 1.0 protocol combined
with HTML, Java Script and Java Applet.
SNMP Network Management
.NETpower card/box supports SNMP v1.0 and v2.0, RFC 1213 (MIB-II), RFC 1628 (UPS MIB) and private UPS
extension MIB. It is compatible with any standard SNMP NMS such as HP OpenView, IBM NetView or others.
Serial port
Serial Port can be used as a console port or can be connected to a modem allowing PPP dial-in and paging.
Network Interface
UTP Fast Ethernet 10/100 auto-sense network interface is provided.
Extension Port
.NETpower SNMP card/box can be connected to an extension device such
as temperature / humidity / smoke sensors, etc. and supply additional
information provided by them.
Real Time Clock
Time can be adjusted by SNTP (Simple Network Time Protocol).
Setup/Configuration
.NETpower SNMP card/box can be set up via telnet or console.
Firmware upgradeable
Firmware can be upgraded via a web browser or via TFTP (Trivial File Transfer Protocol)
LAN Box * SNMP Box *