Omega Vehicle Security LVCN700 Series - Manual

http://www.omega.com
e-mail: [email protected]
®
User’s Guide
LVCN700 Series
Multi-Point Ultrasonic Level Switch
WARRANTY /DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OM EGA Wa rranty adds an additional one (1) month grace
period to the normal one (1) year product warranty to cover handling and shipping time. This ensures
that OMEGA ’s customers receive maximum coverage on each product.
If the unit should malfunction, it must be returned to the factory for evaluation. OMEGA ’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon
examination by OMEGA, if the unit is found to be defective it will be repaired or replaced at no charge.
OMEGA ’s WARRANTY does not apply to defects resulting from any action of the purchaser , including but not
limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unautho-
rized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or
shows evidence of being damaged as a result of excessive corrosion; or current, heat, moisture or vibration;
improper specification; misapplication; misuse or other operating conditions outside of OMEGA ’s control.
Components which wear are not warranted, including but not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However , OMEGA neither
assumes responsibility for any omissions or errors nor assumes liability for any damages that result
from the use of its products in accordance with information provided by OMEGA, either verbal or writ-
ten. OMEGA warrants only that the parts manufactured by it will be as specified and free of defects.
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENT A T IONS OF ANY KIND WHA TS0EVER,
EXPRESSED OR IMPLIED, EXCEPT THA T OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANT ABILITY AND FITNESS FOR A P A RTICULAR PURPOSE ARE HEREBY DIS-
CLAIMED. LIMIT A TION OF LIABILITY : The remedies of purchaser set forth herein are exclusive and the
total liability of OMEGA with respect to this order , whether based on contract, warranty , negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the component
upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or spe-
cial damages.
CONDITIONS: Equipment sold by OMEGA is no t i ntended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity,
medical application, used on humans, or misused in any way, OMEGAassumes no responsibility as set forth
in our basic WA RRANTY/ DISCLAIMER language, and additionally, purchaser will indemnify OMEGAa nd
ho ld OMEGAh arm le ss fro m any liability or damage whatsoever arising out of the use of the Product(s) in
such a manner.
RETURN REQUESTS/ INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR)
NUMBER FROM OMEGA’S CUSTOMER SER VICE DEPAR TMENT (IN ORDER TO AVOID PROCESSING
DELAYS). The assigned AR number should then be marked on the outside of the return package and on
any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR W ARRANTYRETURNS, please have the fol-
lowing information available BEFORE contacting
OMEGA:
1.P .O. number under which the product
was PURCHASED,
2.Model and serial number of the product under
warranty, and
3.Repair instructions and/or specific
problems relative to the product.
FOR NON-W ARRANTYREP AIRS,consult OMEGA
for current repair charges. Have the following
information available BEFORE contacting OMEGA:
1. P .O. number to cover the COST
of the repair,
2.Model and serial number of product, and
3.Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1996 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without prior
written consent of OMEGA ENGINEERING, INC.
Servicing Nor th America:
USA: One Omega Drive, Box 4047
ISO 9001 Cer tified Stamford, CT 06907-0047
Tel: (203) 359-1660
Fax: (203) 359-7700
e-mail: [email protected]
Canada: 976 Bergar
Laval (Quebec) H7L5A1
Tel: (514) 856-6928
FAX: (514) 856-6886
email: [email protected]
For immediate technical or application assistance:
USAand Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
SM
Customer Service: 1-800-622-2378 / 1-800-622-BEST
SM
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
SM
Mexico En Espanol: (001) 203-359-7803
e-mail: [email protected]
FAX: (001) 203-359-7807
[email protected]
Servicing Eur ope:
Czech Republic: Frystatska 184, 733 01 Karvina, Czech Republic
Tel : + 420 (0)59 6311899
FA X: +420 (0)59 631 111 4
Toll Fr ee: 0800-1-66342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
Tel: +49 (0)7056 9398-0
FAX: +49 (0)7056 9398-29
Toll Fr ee in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom: One Omega Drive, River BendTechnology Centr e
ISO 9002 Certif ied Northbank, Irlam, Manchester
M44 5EX, England
Tel: +44 (0)161 777-661 1
FAX: +44 (0)161 777-6622
Toll Fr ee in England: 0800-488-488
e-mail: [email protected]
omega.com
TM
OMEGA
®
OMEGAnet
SM
On-Line Service Internet e-mail
http://www.omega.com [email protected]
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly
pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every
appropriate device upon certification.
The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it con-
tains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patient connected applications.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com
TEMPERATURE
Ⅺ ߜ Thermocouple, RTD & Thermistor Probes,
Connectors, Panels & Assemblies
Ⅺ ߜ Wire: Thermocouple, RTD & Thermistor
Ⅺ ߜ Calibrators & Ice Point References
Ⅺ ߜ Recorders, Controllers & Process Monitors
Ⅺ ߜ Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Ⅺ ߜ Transducers & Strain Gauges
Ⅺ ߜ Load Cells & Pressure Gauges
Ⅺ ߜ Displacement Transducers
Ⅺ ߜ Instrumentation & Accessories
FLOW/LEVEL
Ⅺ ߜ Rotameters, Gas Mass Flowmeters & Flow Computers
Ⅺ ߜ Air Velocity Indicators
Ⅺ ߜ Turbine/Paddlewheel Systems
Ⅺ ߜ Totalizers & Batch Controllers
pH/CONDUCTIVITY
Ⅺ ߜ pH Electrodes, Testers & Accessories
Ⅺ ߜ Benchtop/Laboratory Meters
Ⅺ ߜ Controllers, Calibrators, Simulators & Pumps
Ⅺ ߜ Industrial pH & Conductivity Equipment
DATA ACQUISITION
Ⅺ ߜ Data Acquisition & Engineering Software
Ⅺ ߜ Communications-Based Acquisition Systems
Ⅺ ߜ Plug-in Cards for Apple, IBM & Compatibles
Ⅺ ߜ Datalogging Systems
Ⅺ ߜ Recorders, Printers & Plotters
HEATERS
Ⅺ ߜ Heating Cable
Ⅺ ߜ Cartridge & Strip Heaters
Ⅺ ߜ Immersion & Band Heaters
Ⅺ ߜ Flexible Heaters
Ⅺ ߜ Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺ ߜ Metering & Control Instrumentation
Ⅺ ߜ Refractometers
Ⅺ ߜ Pumps & Tubing
Ⅺ ߜ Air, Soil & Water Monitors
Ⅺ ߜ Industrial Water & Wastewater Treatment
Ⅺ ߜ pH, Conductivity & Dissolved Oxygen Instruments M-4465/0707