Optimus PRO LX8 - Manual (Page 3)

3
3. Turn the left speaker’s negative (–)
terminal counterclockwise to
loosen it, and insert one of the
unmarked wire ends into the
opening. Then turn the terminal
clockwise to tighten it.
Note: You can also use banana
plugs to make this connection.
4. Turn the left speaker’s positive (+)
terminal counterclockwise to
loosen it, and insert the marked
conductor’s wire end into the
opening. Then turn the terminal
clockwise to tighten it.
5. Connect the opposite end of the
left speaker’s unmarked wire to the
receiver/amplifier’s left negative (–)
terminal.
Then connect the opposite end of
the left speaker’s marked wire to
the receiver/amplifier’s positive (+)
terminal
6. Repeat Steps 3–5 to connect the
right speaker.
MAINTENANCE
Your Optimus PRO LX8 Bookshelf
Speaker is an example of superior de-
sign and craftsmanship. The following
suggestions will help you care for your
speaker so you can enjoy it for years.
• Keep the speaker dry. If it gets
wet, wipe it dry immediately.
• Handle the speaker gently and
carefully.
• Use and store the speaker only in
normal temperature environ-
ments.
• Keep the speaker away from dust
and dirt, which can cause prema-
ture wear of parts.
• Wipe the speaker with a damp
cloth occasionally to keep it look-
ing new.
Caution: Do not clean the speaker
with a vacuum cleaner. This might
permanently damage it. Clean the
speaker with a feather duster or soft
cloth.
Modifying or tampering with the
speaker’s internal components can
cause a malfunction and might invali-
date the speaker’s warranty. If your
speaker is not performing as it should,
take it to your local RadioShack store
for assistance.
40-4064.fm Page 3 Wednesday, August 11, 1999 9:50 AM