Ohio Steel Industries HEAPED DUMP CART 3460HKD - Manual (Page 2)

4
4
3
Step3. Loosely attach front gate and corners.
Square assembly and tighten all bolts.
9
11
Step2. Loosely attach front support and
axle holder.
1
2
Step1. Loosely assemble body halves
as shown.
7
Reflector
35
5 34
Hitch
Pin
Hair
Pin
8
Cotter
Pin
Step 5. Loosely attach rear support bar and gate retainers. Slide tailgate rod
through top holes in rear of body and secure with cotter pins. Insert
tail gate and tighten bolts. Add reflectors Insert hitch pin and secure
with hairpin cotter.
MAINTENANCE
Check tire pressure regularly, 30psi. •
Periodically check all bolts. •
Keep cart clean to prevent rust. •
Store inside a clean dry area. •
SAFETY INSTRUCTION
Do not carry passengers in cart. •
Do not tow cart on public roads. •
Never exceed LOAD CAPACITY of 1500lbs. •
Avoid sudden turns or maneuvers. •
When operating on slopes, use lowest •
ground speed and limit load to 200lbs.
Operate up and down slopes, never •
across the face.
Large blade screwdriver.
1/2" wrench and/or socket.
Pliers.
TOOLS REQUIRED
Hub Cap
Axle Washer
Axle Washer
Axle Spacer
Cotter Pin
21
12
11
17
Step 4. Center axle through axle holder & drawbar.
Place washer, spacer, wheel, and washer onto axle.
Lock in place with cotter pin. Bend ends of pin to lock.
REF. NO. QTY. DESCRIPTION
1 1 Right Body Half
2 1 Left Body Half
3 1 Front Gate
4 2 Corner
5 1 Rear Support Bar
7 1 Tailgate
8 1 Tailgate Rod
9 1 Front Support
11 1 Axle Holder
12 1 Drawbar Assembly
17 1 Axle #2
21 2 Wheel #3
34 1 Gate Retainer - Right
35 1 Gate Retainer - Left
39 1 Assembly manual
BB 1 Hardware bag
CARTON CONTENTS