Optiquest Q53 - Manual (Page 20)

15 Optiquest Q53
E
N
G
L
I
S
H
Operation
The monitor automatically goes through the Power Management System steps
when it is idle.
To conserve energy, we recommend turning the monitor off at the power
switch when it will not be used for long periods of time.
State Horizontal Sync Vertical Sync
On On On
Standby Off On
Suspend On Off
Off Off Off
The monitor goes into these power saving stages with the following video
synchronization signals:
Note: The Q53 complies with European NUTEK Power Management Standards.
Note: The Off state means the monitor is in the lowest DPMS state with the
highest power savings.
State LED Power Recovery Time
On green 95 watts (typical) N/A
Standby yellow <30 watts <3 sec
Suspend yellow <8 watts <10 sec
Off yellow <8 watts <10 sec
This monitor meets VESA ® DPMS ™ (Display Power Management Signaling)
standards. For the monitor’s power saving feature to work, the video board or
computer must also meet VESA DPMS standards.
Power Management System