Onkyo A-905TX - Manual (Page 15)

15
Operation
Other Information
Befor
e using
Pr
eparations
Connections
L
R
L
R
LINE/DVD TUNER
OUT IN
L
R
TAPE
SPEAKERS
OUT(REC) OUT(REC) IN (PLAY) IN (PLAY)
OUT(REC) IN (PLAY)
REMOTE CONTROL
CD CDR/PC PROCESSOR MD SUBWOOFER PRE OUT
L
R
AC OUTLET
AC 230-240V
50Hz
SWITCHED
100W MAX.
CAUTION:
SPEAKER IMPEDANCE
4 OHMS MIN./SPEAKER
L
R
SPEAKERS
-
+
-
+
Connecting speaker systems
Connecting left and right speakers
Before connecting
• The load impedance of each speaker must be at least 4 ohms.
• Do not use unnecessarily long or extremely thin speaker cords. Otherwise, the DC resistance of the
speaker cords may become too high, lowering the damping factor and causing the sound quality to
deteriorate.
• Do not connect the speaker cord to the L and R connectors at the same time and do not connect two
or more speakers to the same speaker connectors.
Note
To prevent dam-
age to circuits
never short-circuit
the positive (+)
and negative (–)
speaker wires.
1 Strip 15 mm from
the end of each
cord.
2 Twist the stripped end
of the cord.
This unit
Right
speaker
Left
speaker
2 Insert the stripped end
of the cord.
3 Turn the knob clock-
wise to tighten.
Connecting the speaker cords to the speaker connectors
Preparing the speaker cords for connection
L
R
SPEAKERS
L
R
SPEAKERS
15mm
NO
1 Turn the knob counter-
clockwise to loosen.
NO
NO