Office Star Products EX6201 - Manual (Page 2)

EX6201 DELUXE MID BACK EXECUTIVE LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products January 2007
PART QTY
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . 1
4. Bellows . . . . . . . . . . . . . . . . . . 1
5. Mechanism . . . . . . . . . . . . . . . 1
6. Mechanism Cover . . . . . . . . . . 1
7. Seat Cushion . . . . . . . . . . . . . . 1
8. Back Cushion . . . . . . . . . . . . . 1
9. Arms (9L & 9R) . . . . . . . . . . . . 2
10. Short Screws . . . . . . . . . . . . 12
11. Long Screws . . . . . . . . . . . . . 4
12. Plastic Plugs . . . . . . . . . . . . . 4
13. Back Support (pre-installed . . 1
14. Allen Wrench (not shown) . . . 1
STEP 1
10
4
7
2
1
3
STEP 2 STEP 3
STEP 4 STEP 5
(bottom view) (bottom view)
5
10
10
10 3
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder (3) into Base (1), and slip Bellows (4) over Pneumatic Cylinder (3).
STEP 2 Attach Mechanism (5) to Seat Cushion (7) with the arrow towards the front of the chair, using four Short Screws (10)
TIGHTEN ALL FOUR SCREWS COMPLETELY USING ALLEN WRENCH (14).
STEP 3 Attach Back Support (13) to Seat Cushion (7) on top of Mechanism (5) using four Short Screws (10)
TIGHTEN ALL FOUR SCREWS COMPLETELY USING ALLEN WRENCH (14).
STEP 4 Attach Mechanism Cover (6) to Seat Cushion (7) using four Short Screws (10).
TIGHTEN ALL FOUR SCREWS COMPLETELY USING ALLEN WRENCH (14).
STEP 5 Align the holes in the Arms (9L & 9R) with the holes in the Seat Cushion (7) and Back Cushion (8), attach Arms (9L & 9) using two Long
Screws (11) for each arm.
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (14),
cover screw holes in arms using two Plastic Plugs (12) for each arm.
Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
10
12 11
11 12
12 11
11 12
7
10 10
10
10
10
10
13
7
10
6