Olympus DS-2300 - Manual

BZ8093T4-01-01-Q-REFER-E1 2005.03.18
Black Cyan
Recording Overwrite Recording
1 Press the NEW button to create a new file.
2 Press the REC button to start recording.
The record/play indicator lamp glows red.
Aim the microphone at the sound source.
3 Press the STOP button to stop
recording.
If you want to append additional recordings
to the same file, press the REC button again.
DIGITAL VOICE RECORDER
DS-2300
Quick Start Guide
Getting Started
Power Save Mode
When the recorder is ON but not in use for 10 minutes,
it will switch to power save mode automatically. To
reactivate the recorder again, press any of the buttons
on the recorder.
4H33M12S
REMA I N :
NEW F I LE
AUTHOR A
a
b
c AUTHOR A
00M05S
LENGTH :
27M58S
a
b
a Current recording mode
b New file number
c Selected Author ID
Insert Recording
1 Press the FF or REW button to choose
the file into which you want to overwrite.
2 Press the PLAY button to play the file.
3 Press the STOP button where you want
to start overwriting.
4 Press the REC button to start overwriting.
The record/play indicator lamp glows red.
5 Press the STOP button to stop overwriting.
AUTHOR A
00M12S
I NSERT REC
Turning ON the Recorder
Slide the power switch to the ON position to activate
the recorder.
2
1
3
1 2
3,5
4
1
3
2
4
5
1 Press the FF or REW button to choose
the file into which you want to insert
additional recordings.
2 Press the PLAY button to start playback.
3 While playing the file, press the FOLDER/
MENU button to insert an additional recording.
4 Press the REC button to start inserting
additional recording.
The record/play indicator lamp glows red.
5 Press the STOP button to stop inserting
additional recording.
a Current playback time
b Total recording time of
the file being played