Orion CobaltTM G42110 - Manual (Page 3)

2 © 2007 directed electronics—all rights reserved
INTrODUCTION
Thank you for your purchase of a Orion Cobalt power amplifier . Each Orion Cobalt amplifier is
designed to be the leader in its class offering the most power, advanced features, and extreme
ease of use . In high-end sound systems or high SPL systems, Orion Cobalt amplifiers will give you
years of trouble-free performance .
●
CO600.4 - 250 Watt - four-channel Class A/B amplifier with built-in fully variable
low-pass crossover . Equipped with remote gain, the CO600 .4 is capable of two-channel
operation with a maximum power of 600 W when both the front and rear bridged
channels are driven into 4 ohm speaker loads .
The installation of all Orion Cobalt components will determine the overall performance result .
Improper installation will not only limit the performance of your Orion Cobalt system but also
potentially compromise the reliability of this amplifier . To ensure proper sonic results and com-
ponent reliability, please refer to your authorized dealer for installation assistance or advice . If
you decide to perform the installation yourself, be sure to read the entire manual before begin-
ning the installation .
WHAT’S IN THE BOX
●
() Amplifier
●
(2) Spare fuse(s)
●
(4) #8 self-tapping black Phillips head pan head screws
●
() Amplifier installation and operation manual
PrACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over 00dB may cause permanent hearing loss .
High power automotive sound systems can generate sound pressure levels in excess of 30dB .
When playing your system at high levels, please use hearing protection and avoid long term
exposure .
Model: __________________________________________________
Serial Number: __________________________________________________
Date of Purchase: __________________________________________________