Oracle Audio Technologies Sun Oracle SunDual 10GbE XFP - Manual (Page 31)

Chapter 3 Installing the Adapter 21
3. View the device that you installed.
Using the previous example, type:
4. Use the .properties command to display a list of device properties.
The .properties command displays the specific information about the device. If
you are using the Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Low Profile
Adapter, your output will be similar to the following:
ok cd /pci@7c0/pci@0/pci@8/network@0,1
ok .properties
assigned-addresses 82080010 00000000 04000000 00000000 01000000
82080018 00000000 03500000 00000000 00008000
82080020 00000000 03508000 00000000 00008000
82080030 00000000 03600000 00000000 00100000
local-mac-address 00 14 4f 6b ce 88
phy-type xgf
reg 00080000 00000000 00000000 00000000 00000000
03080010 00000000 00000000 00000000 01000000
03080018 00000000 00000000 00000000 00008000
03080020 00000000 00000000 00000000 00008000
03080030 00000000 00000000 00000000 00100000
version 2XGF 10G Ethernet Adapter FCode 1.26 06/11/14
board-model 501-7283-04
model SUNW,pcie-2xgf
compatible pciex108e,abcd.108e.0.0
pciex108e,abcd.108e.0
pciex108e,abcd.0
pciex108e,abcd
pciexclass,020000
pciexclass,0200
pci108e,abcd
address-bits 00000030
max-frame-size 00002400
network-interface-type ethernet
device_type network
name network
fcode-rom-offset 00000000
interrupts 00000001
class-code 00020000
subsystem-vendor-id 0000108e
revision-id 00000000
device-id 0000abcd
vendor-id 0000108e