Oki POS 80 Plus III - Manual (Page 5)

5 User’s Guide
English
About the OKIPOS 80 Plus III Printer
What Is in This Book?
Who Is It For?
This book is an operator’s guide intended for new and
experienced operators. If you are going to set up, use, or maintain
the OKIPOS 80 Plus III Printer with any point-of-sale system,
then this book is for you.
What Does It Cover?
Of course, this book only covers the OKIPOS 80 Plus III Printer,
not the entire point-of-sale system, but it will tell you all you
need to know about using the printer properly. You’ll find out
what supplies you need to order, how to set up and test the
printer, and how to do the common tasks listed here:
• Change the paper
• Correct problems
• Clean the printer
This book also provides some general and technical information
about the printer, so you’ll know what the features are, how
reliable it is, and what its printing capabilities are.
Where Can You Find More Information?
A Programming Guide is available if you need to know how to
program a point-of-sale terminal or a PC to work with the printer.
It describes all the commands the printer recognises to perform
its functions.
A Maintenance Manual is also available and is intended for
trained technicians who service the printer.
Contact your dealer to order these guides.
Service Information
If you need a printer serviced, whether it’s under warranty or
not, call your dealer. You may have several options for service
depending on the contract you have. Your dealer may service
the printer directly or have a service agreement with a local
service contractor.
You will need to re-pack the printer and ship it to a service
centre. Be sure to keep all the packing materials and the box.
Please refer to “Unpacking the Printer”.
80p3gb.p65 12/01/99, 11:43 5