What’s in the box, Installing process, Tools of the trade – Orion Cobalt CO552 User Manual

Page 3: Finding speaker mounting locations

Advertising
background image

2 © 2009 directed electronics—all rights reserved

Model number: _____________________________

serial number:

_____________________________

Date of Purchase: _____________________________

WHaT’s In THe box

Included in this box are all the necessary mounting hardware and cables for your basic
installation . listed below is a detailed list of the components included in this system package .

Quantity

Description

1

Installation and operation Manual

2

orion

TM

Tweeter elements

2

surface mount hardware

2

flush mount hardware

2

orion

TM

mid/woofer speakers

2

Passive crossovers with cables

1

Mounting template

2

Grills

Mounting screws

InsTallInG PRoCess

The performance of the orion

TM

Component loudspeaker is directly proportional to the

quality of installation . Care taken during the installation process will be rewarded with years
of satisfying performance . If you are unsure about your installation capabilities, please refer
to your local authorized orion

TM

Dealer for technical assistance . orion

TM

dealers are trained

professionals dedicated to extracting the maximum performance out of your orion

TM

system .

If you decide to install this speaker system yourself, please read the entire installation section
before starting your installation .

Tools of THe TRaDe

listed are the majority of the tools required to perform the installation . Having the proper tools
will make the installation much easier . It is very difficult when you get half way through the
installation and discover that you require a specific tool to get yourself through a particular part
of the installation . some of these tools are necessities . some make the job much easier .

o Marking Pen

o electric Drill

o 1/4" Drill bit

o Phillips screwdriver

o 1/8" Drill bit

o Volt/ohm Meter (optional)

o 3/8" Drill bit

o needle nose Pliers

o Hole saw arbor

o assorted Tin snips

o Wire Crimpers

o Wire strippers

o 4-3/4" Hole saw (5-1/4" mid/woofer install .)

o 5-5/8" Hole saw (6-1/2" mid/woofer install .)

o 1-7/8"Hole saw (for flush mount tweeter installation .)

fInDInG sPeakeR MounTInG loCaTIons

Choosing the correct speaker locations will have the greatest effect on the sound quality of the
system . Different considerations are needed when choosing the locations that best suit your

Advertising
This manual is related to the following products: