Omron Healthcare VIBRATING MESH NEBULIZER NE-U22V - Manual (Page 17)

17
DAILY DISINFECTING
Disinfect the Medication Bottle, Mesh Cap, Mask, Mouthpiece, and Mask
and Mouthpiece Adapter after the last treatment of each day.
CAUTION
To prevent damage to the device:
• Do not rinse or immerse the Main Unit in any liquid.
• Do not wash or rinse any of the parts under strong running water.
• Do not touch the mesh with your hand or any other object.
1. Make a solution using one of the following solutions: Vinegar (1 part white vinegar
and 3 parts distilled water), OR mild detergent soap (dishwashing soap in distilled water).
CAUTION
Do not use household bleach. The mesh will rust and the Mesh Cap cannot be used.
2. Lift open the Mesh Cap and pour a small amount of disinfecting solution into the
Medication Bottle.
3. Turn on the device to nebulize the disinfecting solution for 1 to 2 minutes.
4. Turn off the device and remove the Medication Bottle from the Main Unit.
5. Remove the Mesh Cap from the Medication Bottle and discard any remaining
disinfecting solution from the Medication Bottle.
6. Soak the Medication Bottle, Mesh Cap, Mask, Mouthpiece, and Mask and
Mouthpiece Adapter in the disinfecting solution for 10 to 15 minutes.
7. Rinse the Medication Bottle, Mesh Cap, Mask, Mouthpiece, and Mask and
Mouthpiece Adapter in distilled water.
WARNING
Do not leave the cleaning solution in the nebulizer parts. Rinse the nebulizer
parts with distilled water after disinfecting.
8. Gently wipe off excess water with a soft clean cloth or allow the parts to air dry in
a clean environment.
9. Assemble the device. Store the device in the Storage Case or in a clean environment.
NE-U22V_EN_FR_SP_Q6_6.3L.qxd 2/18/09 3:13 PM Page 17