Oregon 91VG - Manual

91VG .050”
10 in. to 18 in. (25 to 46 cm)
3/8”
Ramp-shaped
depth gauges on
each cutter
Bumper tie straps
Commercial Occasional
CHAIN PITCH AND GAUGE
KICKBACK-REDUCING FEATURES
PITCH
GAUGE
91VG F&B A107041 AA 0806
Standard sequence: 91VG
CUTTER SEQUENCE
91VG SAW CHAIN
RECOMMENDED SAW SIZES
RECOMMENDED TYPES OF USE
KICKBACK – ANSI CLASSIFICATION
91VG saw chain is a low kickback saw
chain. It met the kickback performance
requirements of ANSI B175.1 (USA),
and CSA Z62.3 (Canada) when tested
on a representative sample of chain-
saws. Its safety features significantly
reduce the hazard of kickback while
maintaining high cutting performance.
ALL CUTTING SAW CHAINS CAN
KICKBACK, which may result in severe
personal injury to the saw operator or
bystanders. Operate your saw safely.
Read all warnings in your chainsaw
operator’s manual.
Features Benefits
special shaped low-vibration heels
Less vibration than competitive chains •
Twin cutting corners offering outstanding
performance, durability and easy mainte-
nance
•
Ramp-shaped depth gauges The ramp-shape reduces kickback
energies without affecting performance
•
Sharpens with standard 5/32”
round file and file guide
Easy hand maintenance •
Oregon ® 91VG saw chain is specially designed to incorporate all the advan-
tages of our professional series in a consumer style, low-kickback saw
chain. 91VG is ideal for occasional users, but is also extremely well suited
for commercial cutters such as arborists and orchardists who prefer small-
size saws and lightweight low-profile 91-type saw chain that conforms to low
kickback performance requirements for the United States and Canada.
91VG is intended for use with electric
saws and smaller gasoline-powered
saws up to 2.5 cu. in. (41cc)
RECOMMENDED BAR LENGTHS
Bumper tie straps with slots Delivers low-kickback performance
Enhances chip flow
Reduces overall weight of saw chain
•
•
•
Vibe-Ban™ Reduces vibration 25% or more at the
saw handle
•
Help keep oil where it’s needed - on the
chain
Directs oil to the critical rivet flange/hole
interface
•
Lubriwell oil holes ™
LubriLink tie straps ™
Help carry oil around the full length of the
guide bar’s groove
Enhances lubrication of the bar nose
sprocket and bearings
Advanced grind geometry Improved out-of-box grind
Dramatic speed improvements in all
cutting modes
Extreme cutting efficiency, less feed
force required
•
•
•
•
•
•
•
•
Chamfer Chisel cutters with ™