Onkyo DV-SP501 - Manual (Page 14)

14
Front & Rear Panels —Continued
A OPTICAL DIGITAL AUDIO OUTPUT [21]
This optical digital audio output can be connected
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
B COAXIAL DIGITAL AUDIO OUTPUT [21]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C jack [22]
These (Remote Interactive) connectors can be
connected to the connectors on your other
Onkyo AV components for interactive control.
For remote control operation, you must make an
analog RCA/phono connection between your
DV-SP501 and the other AV component, even if
they are connected digitally.
D ANALOG AUDIO OUTPUT [19]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
E COMPONENT VIDEO OUTPUT [20]
These RCA/phono connectors can be used to con-
nect a TV, projector or AV reciever with component
video inputs.
F VIDEO OUTPUT [19]
This RCA/phono connector can be used to connect
a TV, projector or AV reciever with a composite
video input.
G S VIDEO OUTPUT [20]
This connector can be used to connect a TV, projec-
tor or AV reciever with an S-Video input.
H AC INLET [23]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel (Other than European model)
AC INLET
COMPONENT
P B
P R
Y
VIDEO
S VIDEO
REMOTE
CONTROL
MONO
L
R
DIGITAL
OPTICAL COAXIAL
AUDIO
OUTPUT AUDIO
OUTPUT
ANALOG
VIDEO
OUTPUT
DVD PLAYER
MODEL NO. DV-SP 501
1 2 3 4 5 6 7 8