Oster FPSTFP4250 - Manual (Page 5)

www.oster.com 5
1 Pulse – Pulse button must be pressed and held for unit to operate. When
released, unit will stop. Use PULSE for short processing tasks, such as chopping
nuts, raw meats, or vegetables. This lets you check processed results and
control the consistency.
2 On – When this button is pressed, unit runs continuously until OFF button
is pressed.
3 Off – Processor should always be left in OFF position when not in use.
Before Using Your Oster® Food Processor
• When unpacking the product and removing packing material, handle the
Chopping Blade, and Slice/Shred Disc carefully; they are very sharp.
• Wash all parts except the Base in hot, soapy water. Rinse them dry.
These parts can also be placed in the dishwasher. Be sure to read the
Care & Cleaning Section of this manual to learn the correct methods
for taking the unit apart and cleaning.