Omron G3M - Manual (Page 2)

2 Solid State Relay
G3M
Ordering Information (continued)
Isolation Input terminal
pitch
Zero cross
function
Indicator Rated output load
(Applicable output load)
Rated input voltage Model
Phototriac 5.08 mm Yes No 2 A at 100 to 240 VAC
(2 A t 75 t 264 VAC)
5 VDC G3M-202P-US-4
(2 A at 75 to 264 VAC)
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A t 75 t 264 VAC)
5 VDC G3M-203P-4
(3 A at 75 to 264 VAC)
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A at 75 to 264 VAC)
5 VDC G3M-205P-4
(5 A at 75 to 264 VAC)
12 VDC
24 VDC
No 2 A at 100 to 120 VAC
(3 A t 75 t 132 VAC)
5 VDC G3M-102PL-US-4
(3 A at 75 to 132 VAC)
12 VDC
24 VDC
2 A at 100 to 240 VAC
(2 A t 75 t 264 VAC)
5 VDC G3M-202PL-US-4
(2 A at 75 to 264 VAC)
12 VDC
24 VDC
3 A at 100 to 240 VAC
(3 A t 75 t 264 VAC)
5 VDC G3M-203PL-4
(3 A at 75 to 264 VAC)
12 VDC
24 VDC
5 A at 100 to 240 VAC
(5 A t 75 t 264 VAC)
5 VDC G3M-205PL-4
(5 A at 75 to 264 VAC)
12 VDC
24 VDC
Note: 1. TÜV marking is available with “-UTU” in place of “-US” on the part number.
2. VDE versions available. Contact your local OMRON representative.
Specifications
J
RATINGS
Input
Rated voltage Operating voltage Impedance Voltage levels
Must operate voltage Must release voltage
5 VDC 4 to 6 VDC 300 Ω ±20% 4 VDC max. 1 VDC min.
12 VDC 9.6 to 14.4 VDC 800 Ω ±20% 9.6 VDC max.
24 VDC 19.2 to 28.8 VDC 1.6 kΩ ±20% 19.2 VDC max.
Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.
Output
Model Rated voltage Applicable load
Load voltage Load current Inrush current
G3M-102PL-US (-4) 100 to 120 VAC 75 to 132 VAC 0.1 to 2 A 30 A (60 Hz, 1 cycle)
G3M-202P(L)-US (-4) 100 to 240 VAC 75 to 264 VAC
G3M-203P(L) (-4) 0.1 to 3 A 45 A (60 Hz, 1 cycle)
G3M-205P(L) (-4) 0.1 to 5 A