Front & rear panels —continued – Onkyo DV SP404 User Manual
Page 14
14
Front & Rear Panels
—Continued
A
HDMI OUT [21]
This connector can be used to connect a TV or pro-
jector with an HDMI input. This connector outputs
digital audio and digital video.
B
OPTICAL DIGITAL AUDIO OUT [22] (not
North American and European models)
This optical digital audio output can be connected
to an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
COAXIAL DIGITAL AUDIO OUT [22]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D
COMPONENT VIDEO OUT [20]
These sockets output component video and can be
connected to an component video input on a TV or
projector.
E
VIDEO OUT [18]
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
F
ANALOG AUDIO OUT [18]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
G
AV CONNECTOR [20] (European model only)
This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs 2-channel stereo audio, composite
video, and RGB video.
H
AC INLET [23] (not North American model)
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
I
S VIDEO VIDEO OUT [20] (not European
model)
This connector can be used to connect a TV or pro-
jector with an S-Video input.
Rear Panel
8
9
3
1
4
6
5
9
3
1
2
4
6
5
8
7
3
1
4
6
5
DV-SP404 North American model
DV-SP404 Oceanian model
DV-SP404E European model
DV-SP404.404E_En.book Page 14 Wednesday, June 7, 2006 1:50 PM