Over And Back PAP2 - Manual (Page 9)

Phone Adapter with 2 Ports for Voice-over-IP
3 Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
Chapter 2: Getting to Know the Phone Adapter
Back Panel Ports
The Phone Adapter’s ports are located on the back panel.
PHONE 1 Port For your primary Vonage Internet phone line, the PHONE 1 port allows you to connect your
telephone to the Phone Adapter using an RJ-11 telephone cable (not included).
PHONE 2 Port If you add a second Vonage line, then use the PHONE 2 port. It allows you to connect a
second telephone (or fax machine) to the Phone Adapter using an RJ-11 telephone cable
(not included).
ETHERNET Port The ETHERNET port allows you to connect the Phone Adapter to your router or gateway
using a Category 5 (or better) Ethernet network cable.
POWER Port The POWER port is where you will connect the included power adapter.
Figure 2-1: Back Panel
NOTE: These Phone ports do
not carry any voltage.