Sylvania CR202SL8 - Manual (Page 19)

19
EN
WATCHING TV
INTRODUCTION
CONNECTION
INITIAL SETTING
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
[FORE COLOR]
Font color of the displayed caption can be switched as
below.
or VOL VOL
[TRANSPARENT]
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[YELLOW]
[MAGENTA]
[CYAN]
[BACK OPACITY]
Background opacity of the displayed caption can be
switched as below.
or VOL VOL
[SOLID]
[TRANSLUCENT]
[FLASH]
[BACK COLOR]
Background color of the displayed caption can be
switched as below.
or VOL VOL
[TRANSPARENT]
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[YELLOW]
[MAGENTA]
[CYAN]
4
Press [MENU] to exit.
MENU
V-chip
V-chip reads the ratings for programs, then denies access to the programs
which exceed the rating level you set. With this function, you can block
certain programming inappropriate for children.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K /L] to select “V-CHIP SETUP“,
then press [VOL X].
e.g.) analog TV mode
or
CH
CH
VOL
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
3
Use [the Number buttons] to enter the 4-digit
numbers for your password.
–/ENT
3 2 1
6 5 4
9 8
+ 100 0
7
PASSWORD
- - - -
• When you have not set up your password, enter 0000.
• When the password is correct, the following “V-CHIP
SETUP” menu is displayed.
e.g.) analog TV mode
- V - CHIP SETUP -
TV RATING
MPAA RATING
CHANGE PASSWORD A
B
C
See the following description for setting each item.
Note:
• “DOWNLOADABLE RATING“ will be available when the unit
receivers a digital broadcast using the new rating system.
• When you select a rating and set it to “BLOCK”, the higher
ratings will be blocked automatically. The lower ratings will
be available for viewing.
• When you set the highest rating to “VIEW”, all ratings turn
to “VIEW” automatically.
• If the “PROTECTED...” message appears during your TV
viewing, change to a channel that is not blocked. Then, you
can access “V-CHIP SETUP” menu and change the setting to
allow all TV viewing.
• To block any inappropriate programming, set your limits in
both “TV RATING” and “MPAA RATING”.
• The V-chip setting will be retained after a power failure
(except the access code reverts to 0000).
5
P7150UT_EN.indd 19 P7150UT_EN.indd 19 2006/11/27 20:54:10 2006/11/27 20:54:10