Olympus CAMEDIA P-400ID - Manual (Page 14)

10
GB
Selecting the P-400 Mode and Passport Mode on the P-400ID
You can select the P-400 Mode and Passport mode by performing the following operation of the
P-400ID when the power is on.
1
Changing from the P-400 Mode to the Passport Mode
In the Passport Mode, the ID function can be used in addition to all functions of the P-400.
1) After turning the mode selector dial to point straight down, turn on the power switch
while pressing the up arrow button.
2) The printer is turned on in the passport (ID) mode. Although the opening display is the
same as before, the display of the passport (ID) mode is displayed the next time the
power is turned on.
2
Changing from the Passport Mode to the P-400 Mode
The P-400 Mode should only be used when the ID function is not required.
1) After turning the mode selector dial to point straight down, turn on the power switch
while pressing the down arrow button.
2) The printer is turned on in the normal mode. Although the opening display is the same
as before, the display of the normal mode is displayed the next time the power is turned
on.