Oki 58374501 - Manual

Finisher Unit Installation Guide
Components
1 Finisher Unit 7 Inverter Stand
2 Finisher stand 8 Clear Band
3 Finisher Stacker 9 Band Stopper, Small
4 Finisher Cover 10 Band Stopper, Large
5 Power Cord 11 Metal Brackets
6 Inverter Unit 12 Cable (inverter to printer)
Not illustrated: Screws
Step 1: Prepare the Printer
1. Turn the printer off ( ! ) and disconnect the
power cord ( " ) and interface cable ( # ).
2. Using a screwdriver, remove the breakout
panels on the side of the printer.