Olympus CAMEDIA P-330N - Manual (Page 70)

Connecting to a Macintosh and its compatible
Use the supplied cable(Mini DIN 8-pin/Mini DIN
8-pin).
For Macintosh:
If your computer does
not match the plug
Use a commercialy
available cable having a
Mini DIN 8-pin plug to
connect the printer and a
matching plug to connect
the computer. (Standard
Macintosh serial cable)
Note
You cannot use the
printer and the driver
software on a network.
Connect the printer
directly to the computer.
Note on the power
If you connect the printer
to the computer via other
devices (such as
OLYMPUS ES-10 film
scanner), turn on all
devices connected.
Tip
The image of the
computer is printed in the
direction as shown below.
Image of the computer
Printed image
2 Turn on the printer and the
computer
3 Install the printer driver
See the supplied Installation Guide for the installation
procedure.
4 Feed the data from the computer
See the supplied Installation Guide for the printing
operation.
Printing
27