Oregon MP200 - Manual (Page 18)

EN
15
The player will not start or shuts off soon after it starts.
Check the battery level and make sure it is fully charged.
The buttons do not work.
The button hold feature may be on. See section "BUTTON HOLD" for
more information.
The player is not functioning normally.
The player may need to be reset. See section "RESET" for more
information. You may also format the player from your computer and
upgrade the firmware. Please see section "UPGRADING FIRMWARE"
for information.
The flash memory appears to be corrupted.
Upgrade to the latest firmware to optimize the player's performance.
Remember to check the Format Data Area box during the upgrade
process. Please see section on "UPGRADING FIRMWARE:
WINDOWS USERS ONLY" for more information.
No sound is coming out of the headphones.
Check to make sure they are plugged in correctly and the volume is
turned up.
Your computer does not locate your player.
Check to make sure the USB cable is connected properly.
If you are using Win98SE, make sure you have installed the driver
software.
Cannot store any more files on the player.
The memory may be full. Delete files to make some room.
SOFTWARE
The MP200 software does not automatically begin when you insert
the CD.
You may need to start the installation process manually.
1. Double click thsse My Computer icon on the Windows desktop.
2. Double click the drive that contains the CD-ROM.
MP200 Eng Manul R2(V1.1) OP 11/15/04, 10:34 AM 15
¶´ƒ