Oce North America TDS700 - Manual (Page 17)

17
Turn on and off the Océ TDS700
Printer Use the On/off switch at the rear of the printer to turn on and off
power to the printer. When you are facing the front side of the
printer, the power switch is located at the left hand side at the rear
of the printer.
Note: With this switch you also turn on and off the
power for the climate control function of the printer.
Keep the power turned on to be able to use the Climate
control function. Configure the Sleep mode setting in
the Power logic controller application to ensure
minimal power consumption when the system switches
to sleep mode.
Océ TDS700
Power Logic
®
controller
Use the On/off key at the front of the printer to turn on and off the
controller that is located inside the printer.
When the controller is on:
Press the key only once and wait 30-60 seconds. The green LED
of the key turns off to indicate that the controller is turned off.
Keep the key pressed for 4 seconds to immediately turn off the
controller.
When the controller is off:
Press the key only once to start up the controller. The green LED
is turned on when you press the key.
You can also shut down the controller in the Océ TDS700 Power
Logic
® controller application. Access the System menu in the top
toolbar to do so.
Note: Use the power key at the front of the controller
when the controller is not placed in the printer but in a
separate console.
[7] Power On / off options (2 – 2)
Part Description