Oliso Freshkeeper 500 - Manual (Page 25)


troubleshooting
ProBLeM thinGs to checK soLution
LED is on and green.
Bag sensor is engaged.
Lid is closed and locked.
Using the wrong AC Adaptor
Bag and food is too wet.
Heat seal is too hot.
Existing seals are incomplete or
leaking. See page -10.
Zipper is not securely closed.
Plug in the AC Adaptor.
Reposition the bag using the same pucture hole so
that the bag sensor is covered. See page e.
Put your finger over the dots on Frisper and push
down until you hear a click. See page .
Use the supplied Oliso AC Adaptor.
Minimize food liquids. Pat dry raw meat. See pages
1-1 for recommendations on handling food.
Wait at least  seconds between each use of Frisper.
Re-seal the incomplete circle. Then find a new
sealing circle to use. See page 10.
Close the zipper securely. Run your fingers through
the zipper-top. See page .
Frisper is not working.
Sound is not present.
Heat seal is incomplete.
Bag is leaking.