Omron Healthcare HEM670IT - Manual (Page 17)

17
SETTING THE MEMORY FUNCTION
The Monitor stores up to 84 sets of measurement values (blood pressure
and pulse rate) with the date and time. When 84 sets of measurement
values are stored in the memory, the oldest record is deleted to save the
most recent measurement values.
The monitor is designed to store the measurement values for one person in
the memory. If more than one person uses this monitor, we recommend
setting the Automatic Memory Function to OFF.
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button.
The Auto Memory Screen is displayed with the current setting. The
unit is set to ON at the time of purchase.
2. SELECTING ON OR OFF
Press the ( ) button to change the setting
to OFF.
Press the ( ) button to change the setting
to ON.
3. CONFIRM THE SETTING
To continue to change other settings, press the SET button to confirm
the Memory Function you selected. The TruRead™ Screen is
displayed.
If no other changes are needed, press the START/STOP button to turn
the power off.
Automatic Memory Screen
Automatic Memory OFF
Screen
HEM-6040-Z_EN_SP_Q6_051507.qxd 5/15/07 12:25 PM Page 17