Optimus MD-1150 - Manual (Page 12)

12
Note: Each tune plays a different
preset tone for the melody, but you
can change to another tone even
while the tune is playing. Follow the
steps under “Selecting/Playing a
Preset Tone” on Page 14 to select a
different tone.
4. Use MAIN VOLUME to adjust the
overall volume as desired.
To adjust only the accompaniment
volume (except tunes 70 to 99),
press
ACCOMP VOLUME then enter
the desired volume level using the
number keys (between 0 and 9) or
press
+ or – within 5 seconds.
5. To move to a particular section of a
tune, hold down REW or FF during
play. The indicator ( or )
appears along with the play indica-
tor ( ). The keyboard sounds a
beep for each measure. When you
reach the section you want, release
REW or FF to resume play.
Hint: You can find the scores for
most of the prerecorded tunes in the
Sheet Music and Play Guide for the
Prerecorded Tunes, supplied with
your MD-1150. Refer to this sheet to
count the number of measures to
skip.
To change the tempo, press TEMPO
or . The current tempo setting
appears.
Notes:
• To quickly slow down or speed up
the tempo, hold down TEMPO
or .
• To reset the tempo to its default
(original) speed, press TEMPO
or at the same time.
• Tunes 70 to 99 are arranged so
the tempo changes during play.
However, if you select a tempo
other than the one you previously
selected, those tunes play in the
newest tempo.
6. To temporarily stop playing the tune,
press PLAY/PAUSE again.
appears. To stop the tune com-
pletely, press
STOP .
START/STOP
ACCOMP
VOLUME
TONE
TEMPO
REW FF ON/OFF
RHYTHM
42-4039.fm Page 12 Friday, March 3, 2000 8:55 AM