Chapter 7 - cautionary notes, About selftest (loop back test), Network enable/disable setting – Oki 3100e User Manual

Page 97

Advertising
background image

English

Chapter 7 - Cautionary Notes

91

Chapter 7 - Cautionary Notes

About SELFTEST (Loop Back
Test)

The SELFTEST menu of NETMNT, which is located
in NETWORK of Menu2 on the printer, is for
inspecting the hardware of this network card at factory
shipping.

General users must not execute SELFTEST. If the
general user executes this SELFTEST, NG is displayed
which is the default and to the specification for the
network card.

If by mistake you execute SELFTEST, set the printer to
OFF-LINE and reset it by holding the Reset button for
2 seconds or longer, or turn the power to the printer off
and on again.

Network enable/disable setting

To set NETWORK items in MENU1 on the printer to
DISABLE, you must make sure that the printer is not
receiving print data.

If you change the NETWORK to DISABLE while the
printer is receiving print data, it will cause printer or
network problems.

3100euGB.book Page 91 Friday, March 16, 2001 1:18 PM

Advertising