Omnitron Systems Technology OST iConverter 4Tx VT - Manual (Page 2)

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • [email protected] • 140 Technology Dr. • Irvine, CA 92618
Trademarks are owned by their respective companies. iConverter is a registered trademark of Omnitron Systems Technology, Inc.
NetOutlook is a trademark of Omnitron Systems Technology, Inc. Specifications subject to change without notice.
©2003-2007 Omnitron Systems Technology, Inc. All rights reserved.
091-18481-001B 9/07
Management is accomplished by using a Network Management
Module (NMM) or a media converter with integrated management
(such as an
iConverter 10/100M2) that provides monitoring,
remote configuration and trap notification. The management
module can be accessed via SNMP, Telnet and via a serial port.
The SNMP-based management is accomplished via Omnitron’s
intuitive, graphic-oriented
NetOutlook management software or
third party SNMP management software. Management via
the Telnet and the serial interfaces have an easy-to-use,
menu-driven interface.
Some of the real-time 4Tx VT parameters that can be monitored
include link and data receive status. Other parameters include
module type and model, hardware and software revisions, serial
numbers and a user-defined identifier.
The user can override the 4Tx VT module’s physical switch
settings by using SNMP or Telnet to remotely configure switch-
selectable parameters such as auto-negotiation, Half or
Full-Duplex, and Backplane Selection.
In addition to all standard iConverter SNMP traps such as module
insertion and removal, the 4Tx VT modules can generate traps
on port state changes including link-up and link-down. Trap
monitoring of specific events can be selectively enabled or
disabled by the network administrator.
The iConverter family of managed fiber access media converters
are used in Service Provider access networks and Enterprise
LANs.
iConverter media converters provide fiber connectivity
with copper to fiber, multimode fiber to single-mode fiber, or
dual fiber to single-fiber conversions.
Model Type Connectors Distance
8481-4 RJ-45 x 4 100m
For wide temperature (-40 to 60º C) modules, add a "W" to the end of
the model number. Consult factory for other configurations and extended
temperature (-40 to +75º C) modules.
Model Type 4Tx VT
Protocols 10BASE-T, 100BASE-TX
UTP Connectors RJ-45
Controls
BP Enable, Auto/Man,
10/100, FDX/HDX
LED Displays Power, 10/100 UTP Link
Dimensions W:0.85" x D:4.5" x H:2.8"
Weight 8 oz.
Compliance UL, CE, FCC Class A
Power Requirement 0.7A @ 3.3VDC (typical)
Temperature
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4000m
MTBF (hrs) 740,000