Printing the date and time – Olympus RC-200 User Manual

Page 50

Advertising
background image

PRINTING THE DATE AND TIME (for

DUARTZDATE/DLX models only)

Choose the desired mode.

The mode will switch in the

described order.

The date unit uses the same
power switch as the main unit.

Make sure to correct the data

after the battery is replaced.

The data is imprinted in the lower

right of the picture. If there is

something whitish or tinged with

orange where the data is

imprinted, the data may be

difficult to read. The data may

not be printed correctly on the

frame(s) after the specified final

exposure of the film.

50

Advertising
This manual is related to the following products: