Omega Speaker Systems iLD Series - Manual (Page 20)

4.5.1 Read Devices
• Read variables from up to eight different devices.
• Read up to eight variables from the same device.
• Read and write the setpoint values to the device.
Figure 4.5 Read Devices
4.5.1.1 Device Setpoints
• When you click on Device No in the Read Device Page, you can edit the Setpoints.
Figure 4.6 Device Setpoints
4.5.2 Send Raw Command
• Send single command and receive response.
Figure 4.7 Serial Device Query
Command
Response
*01 X01
01X01092.4
SERIAL DEVICE QUERY
http://192.168.1.200 Address
Send
SERIAL DEVICE QUERY
DEVICE SETPOINTS
DEVICE SETPOINTS
http://192.168.1.200 Address
Device No. (R01)
Main Menu
Setpoint #2: 0.
Setpoint #3: 0.
Setpoint #4: 0.
Setpoint #1: 0.
Update Reset
16
1 . iSeries1 092.4 Deg.C
Auto Update
READ DEVICES
http://192.168.1.200 Address
000
READ DEVICES
092.4 Deg. C
Main Menu
Click on Device No. on the left to query/change Device Setpoints
If you have 000, click the Auto Update
button to manually refresh the page.
If you want to change the time
interval of the page refresh, enter the
amount of seconds in the box.