Olivetti d-Copia 20W - Manual (Page 62)

58
7
Chapter 7
PERIPHERAL DEVICES AND SUPPLIES
Optional equipment and supplies are explained in this chapter. To purchase optional equipment and supplies,
contact your authorised service representative.
PERIPHERAL DEVICES
SINGLE PASS FEEDER
For the names of the parts of the SPF, see "PART NAMES AND FUNCTIONS". (p.8)
Specifications
* The detectable original sizes vary by country and region.
As a part of our policy of continuous improvement, OLIVETTI reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values in individual units.
Note
d-Copia 20W d-Copia 16W
"SPF"
SPF-16W (Single pass feeder)
Acceptable
original
Weight 56 g/ m
2
to 90 g/ m
2
(15 lbs. to 24 lbs.)
Size
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
(5-1/2 x 8-1/2" size originals cannot be used in the duplex copy mode.)
Capacity
Up to 40 sheets (Thickness 4 mm (5/32") and below)
For B4 (8-1/2" x 13") and larger sizes, up to 30 sheets
Detectable original
sizes*
A5, B5, B5R, A4, A4R, B4, A3
(5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17")
Weight 5.0 k g (11.1 lbs.)
Dimensions
583 mm (W) x 435 mm (D) x 133 mm (H)
(22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H))