Omega Engineering Four Zone Temperature OMA-VM520-DCP - Manual (Page 10)

10
Accessing the Program Menu
From the Main Menu, press 3
► The "Full Access" PIN will be requested if the "Acknowledge Only" PIN
was entered initially. If the correct "Full Access" PIN is not entered, the
Four Zone Temperature Monitor and Alarm will hang up.
Programming Contact Telephone/Pager Numbers
The Four Zone Temperature Monitor and Alarm stores up to four (4) contact
telephone or pager numbers.
1
From the Program Menu, Select 1 to set telephone numbers.
2 You will hear "Select contact one to four"
3 Select 1 for the first contact number, 2 for the second contact number,
3 for the third contact number, or 4 for the fourth contact number.
► Press 0 to return to the Program Menu.
4 You will hear "Contact x is xxxxxxx" or "Contact x is Empty, press one
to change"
5 Press 1 to make a change or enter a telephone number.
6 You will hear “Enter number then press pound”
7 Enter the number, followed by a #
► For pager numbers, enter * as the first digit of the number
► Enter the full telephone number (1 + area code if necessary)
► If an extra delay between digits or after dialing is required, entering *
Programming the Autodialer Functions
Program Menu
Option Function
1 Program Contact Telephone Numbers
2 Program Local ID Number
3 Record Unit ID Message
4 Program Number of Rings
5 Change "Full Access" PIN
6 Program Reminder Calls
7 Program Repeat Warning Messages
* Change Callout Time Delay
# Change “Acknowledge Only” PIN
0 Exit (return to Main Menu)
8 Set Temperature Readout Units (°C or °F)
9 Program Power Outage Delay Time
NOT SPOKEN
NOT SPOKEN
NOT SPOKEN
NOT SPOKEN
NOT SPOKEN
NOT SPOKEN
5 Press #
6 You will hear "Enter Sensor Number to Change"
7 Enter the number of the sensor whose min and max readings you wish
to reset to the current temperature.
Confirming Alarm Conditions Remotely
During callouts, the Four Zone Temperature Monitor and Alarm will prompt
you to enter a PIN number, enter either the Full Access PIN or "1234", the
Acknowledge Only PIN.
If you have received a page or a voice mail message regarding an alarm
condition that you wish to confirm. Simply call the Four Zone Temperature
Monitor and Alarm and enter either the Full Access PIN or "1234", the Ac-
knowledge Only PIN, The alarm relay will de-energize, and the Four Zone
Temperature Monitor and Alarm will stop making callouts for the current
alarm condition. This action does not override the Reminder Call fea-
ture.
Confirming Alarm Conditions Locally
To confirm an alarm condition locally push the black button on the left side
of the Four Zone Temperature Monitor and Alarm. The alarm relay will de-
energize, and the Four Zone Temperature Monitor and Alarm will stop mak-
ing callouts for the current alarm condition. This action does not override
the Reminder Call feature.
15