Onkyo AV Receiver TX-NR5010 - Manual (Page 47)

Turning On & Basic Operations
En-47
*1 After enabling the corresponding speakers, press RECEIVER
followed by SP (speaker layout) repeatedly to select the
speakers you want to use: surround back and front
high,surround back and front wide, or front high and front
wide.
*2 This layout is only available when the external power amplifier
is connected to FRONT WIDE PRE OUT of the AV receiver
and the “11ch Playback” setting is set to “Yes” ( ➔ page 14 ,
66 ).
*1
*2