Orion Car Audio Cobalt CO104S User Manual

Page 8

Advertising
background image

© 2008 directed electronics—all rights reserved

7

Series/Parallel - 4 Speakers (Single 4 Ohm Coils)

4 single 4 ohm voice coil subwoofers with the voice coils of each pair of speaker wired
in series and then all 4 speakers wired in parallel to result in a 4 ohm load on the
amplifier.

+

+

+

4 ohm

_

_

_

4 ohm

+

+

4 ohm

_

4 ohm

_

1

2

3

4

Figure 5
Figura 5
Abbildung 5

1. Connect the negative (-) terminal from speaker 1 to the negative terminal on

speaker 3 and then hook that wire to the negative (-) terminal on the amplifier.

2. Connect the positive (+) terminal from speaker 1 to the negative (-) terminal on

speaker 2.

3. Connect the positive (+) terminal from speaker 3 to the negative (-) terminal on

speaker 4.

4. Connect the positive (+) terminal from speaker 2 to the positive (+) terminal on

speaker 4 and then hook that wire to the positive (+) terminal on the amplifer.

Advertising