Oki B 2400 - Manual (Page 26)

2-8 Service Manual
24xx
Load/Unload
does not function
when the push
tractor is installed.
Form feed length is
not correct.
Load/Unload
functions with cut
sheets in use.
Be sure the paper select lever is in the correct
position.
Go to “Paper Select Sensor Service Check” on
page 2-25 .
Continuous forms
feed, but cut sheets
fail to load. Be sure the paper select lever is in the cut sheet
position.
Verify that continuous forms have been parked
using the Load/Unload button.
Be sure Auto Cut Sheet is enabled in the Setup
Mode.
Go to “Paper Select Sensor Service Check” on
page 2-25 .
Load/Unload
functions when the
pull tractor is
installed.
With Paper Out
blinking, FormFeed
does not operate
until paper is located
at first print line.
Be sure the paper select lever is in the tractor
position.
Go to “Pull Tractor Sensor Service Check” on
page 2-31 .
Symptom Action