Oki ES 1624n MFP - Manual (Page 321)

Windows: Software Utilities • 321
Using Overlays: Windows NT 4.0 PostScript
Defining Overlays: NT 4.0 PostScript
1.
Click Start
→
Settings
→
Printers .
2. Right click the PostScript printer icon, then click Document
Defaults .
The Default dialog box appears.
3. Click the Job Options , and click Overlay .
4. Click New .
The Define Overlays dialog box appears.
5. Under Overlay Name , enter a name for the group of overlays you
are creating.
6. In the Print on Pages drop-down list, select on which pages the
overlay is to be printed, or select Custom and enter specific page
numbers under Custom pages .
7. Under Form Name , type in the name of the overlay file exactly as
it was stored using the Storage Device Manager software (see
the File List printout), including the file extension.HST.
Note: Overlay file names are case sensitive.
8. Click Add .
9. Repeat steps 7 and 8 to add additional overlays (maximum of
three per group).
10. Click OK .
To create additional overlay groups (up to 32 can be defined), repeat
steps 5 to 10 above.
11. Click OK twice and close the Printers dialog box.
Printing Using Overlays: NT 4.0 PostScript
1.
Open the document in the software application.
2. Click File
→
Print .
The Print dialog box appears.
3. Scroll down to Layout , then click Use Overlay .
4. Click Setting of Overlay .
The Setting of Overlay dialog box appears.