Onkyo C-705TX - Manual (Page 13)

13
Befor
e Using
Connections
Other Information
Operations
Playing CDs
Operations
Normal play
• When you are using the C-705TX with the A-
905TX/R-805TX Onkyo Separate Collection se-
ries component, turn the A-905TX’s/R-805TX’s
POWER switch ON.
1
Press STANDBY/ON button to turn
on the unit.
The STANDBY indicator goes off, and the dis-
play will light up.
2
Press the (OPEN/CLOSE) button
to open the disc tray.
3
Put the disc in the
disc tray, with its
label side facing up.
4
Press the button to close the disc
tray.
5
Press the button.
The CD player starts playing the first track
(track 1).
DUAL OPTICAL OUTPUT
TR-1
DISPLAY
COMPACT DISC PLAYER
STANDBY
STANDBY/ ON
C-705TX
STANDBY/ON CLOCK SLEEP EFFECT GRAPHIC EQ MODE
1 2 3
4 5 6
7 8 9
10 / 0 - - / - - -
VOLUME
PRESET
F M A M
PLAY MODE
PLAY MODE
REPEAT
CLEAR
SCROLL
MEMORY
REPEAT
CLEAR
DISC
REPEAT
CLEAR
ACOUSTIC PRESENCE
TONE
RANDOM
TIMER
UP/DOWN
ENTER
MUTING
INPUT TUNER
M D
DVD
C D
CDR
TAPE
REC
REC
PAUSE / STEP
STANDBY/ ON
REMOTE CONTROLLER RC - 456S
STANDBY/
ON
(Supplied with
A-905TX/R-805TX)
Disc tray
Remote controller
Remote controller
Remote controller
• If the button is pressed when the unit is in
STANDBY mode, it turns on automatically then
starts playing the CD, if one is loaded in the
disc tray. Your amplifier also turns on if it is an
Onkyo A-905TX/R-805TX (refer to page 8).
If the CD player does not start playing when
the
button is pressed
• The disc may be upside down in the tray. Press
the button to open the disc tray. If you can-
not see the label on the disc, turn the disc over,
label side up.
• Moisture may have formed inside the CD player.
Remove the CD from the disc tray and leave
the power on for about one hour to evaporate
the moisture.
To stop playing
Press the button.
To pause playing
Press the button. (The PAUSE indicator lights.)
To resume play, press the
or button.
STANDBY
STANDBY/ ON
Label side
RC-456S
Note
You can skip this step by pressing the
but-
ton instead of the button. In this case, the
disc tray closes automatically and Track 1
starts playing.
Remote controller
STANDBY/ ON