Olevia LT37HVS - Manual (Page 72)

70
Adjusting On Screen Displays (OSD) OSD-DTV
You must reset the Receiver back to its default status if you forget the
password. You will lose all your settings after the Receiver has been reset.
Using the "POWER button on the front panel or remote control, cycle
the power off and back on again. When the front panel LED displays
"boot", press these buttons in a sequence: " ", " ", " " and
" MENU-SELECT". The Receiver will be reset as the default status
automatically.
Use the default password "0000" to access the Lock menu and set a
new password.
Be sure to repeat your channel Auto Scan before using the receiver.
INFO (Information-Plate)
When you are watching digital channels, you can view the current program
name and relevant information by pressing the "DISPLAY" button toshow
I-Plate on screen.
Current Program
After pressing the INFO button, the I-Plate appears including this
information:
- TV Station Name
- Current Channel Number
- Current Local Time
- Program Name
- Program start and end time
- Picture resolution
- Closed Caption
- Audio System (Dolby 5.1 or PCM)
- Program Rating Information