Oki 8810 - Manual (Page 4)

4
Warning!
Make sure the printer is turned off before you
open the cover.
3. Open the cover.
4. Verify that the printhead is centered (at the
“Ribbon set position”).
5. Unpack the ribbon cartridge and remove the lock
pieces (1).
6. Swing out the ribbon arms on either end of the
cartridge until they snap into place.
7. Tilt the display panel toward you.
F2_03_open_c
over.jpg
F2_07a.jpg
F2_09.jpg
F2_10a.jpg
F2_04_Tilt_Display.J
PG